Delta 15-231 Drill Press 15" Production

Delta 15-231 15" Production Drill Press, 6" Stroke

---

*The 15-231 includes motor and controls, Belt and pulley guard, Belt and motor pulley (supplied wit 5/8" bore unless 1/2" bore is specified), Self-locking depth stop,, Depth gage, Self-ejecting chuck key.

FEATURES

• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four oversized, preloaded, lubricated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point
  
• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450 to 4,700 rpm with a 1,725 rpm motor
  
• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
  
• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling...PLUS, the extra stroke required for clearing jigs and fixtures
  
• Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials, an extra-fast speed for working soft materials or an optimum speed for any size bit material
  
• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, holds speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission
  
• Note: To convert 15" Drill Press with 1/2" key chuck to No. 2 M.T. spindle, order No. 15-833 No. 2 M.T. adapter.
  
• Note: To obtain 1,140 rpm 1/2 HP motor in place of standard 1,725 rpm 3/4 HP motor, order Cat. No. 49-008 for single phase and Cat. No. 49-009 for three phase, in addition to complete machine and electricals. 1,140 rpm 1/2 HP motor supplies equivalent torque to 1,725 rpm 3/4 HP motor.

SPECIFICATIONS

• Motor: 1 Phase, 3/4 HP
  
• Motor Control: Push-Button Switch Only
  
• Speeds: With 1,725 RPM motor: 450 to 4,700 RPM
  With 1,140 RPM motor: 300 to 3,100 RPM
  
• Table Size: Standard: 11" x 14" (279 x 356 mm)
  Production (overall): 15-1/2" x 21-1/2" (394 x 546 mm)
  Production (inside of collant trough): 12" x 18" (305 x 457 mm) 
  
• Table Tilt: 90° L and R °
• Column Diameter: 2-3/4"(70 mm) " VS6: 74" (1880 mm) "
  
• Width: Tilting Table: 15-1/2" (394 mm)
  21-1/2" (546 mm) "
• Weight: 221 lbs (100 kg) lbs
  
• Shipping Weight: 295lbs

SHIPPING COST:
 Free Shipping is to a business address, with loading dock / Fork Lift. Freight companies Do Not consider businesses run from a residential/farm address as a business. Residential fees will apply.
RESIDENTIAL AND LIFTGATE FEES WILL APPLY-EMAIL FOR COST.
See order Policy for more infomation.