Delta 15-233 Drill Press 15" Production

Delta 15-233 15" Production Drill Press, 6" Stroke

---

*The 15-233 includes Production-table, Belt and pulley guard, Belt and motor pulley (supplied wit 5/8" bore unless 1/2" bore is specified), self-locking depth stop, depth gage, self-ejecting chuck key, motor and controls.

FEATURES

• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.
  
• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.
  
• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
  
• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.
  
• Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.
  
• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.

SPECIFICATIONS

• Motor: 3 Phase, 3/4 HP
  
• Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer and 3-Leg Overload Protection (LVC)
  
• Speeds: With 1,725 RPM motor: 450 to 4,700 RPM
  With 1,140 RPM motor: 300 to 3,100 RPM
  
• Table Size: Standard: 11" x 14" (279 x 356 mm)
  Production (overall): 15-1/2" x 21-1/2" (394 x 546 mm)
  Production (inside of collant trough): 12" x 18" (305 x 457 mm) 
  
• Table Tilt: 90° L and R °
• Column Diameter: 2 3/4" (70 mm) 
• Quill Diameter: 2" (51 mm) 
  
• Quill Stroke: 6" (152 mm) 
  
• Key Chuck Capacity: (With Std. Jacobs #33 taper) 1/2" (13 mm) 
• Height: "6 PLUS 6: 71-1/2" (1816 mm)
  VS6: 74" (1880 mm) 
  
• Width: Tilting Table: 15-1/2" (394 mm)
  21-1/2" (546 mm)
• Weight: 225 lbs (102 kg) lbs
  
• Shipping Weight: 275lbs

SHIPPING COST:
 Free Shipping is to a business address, with loading dock / Fork Lift. Freight companies Do Not consider businesses run from a residential/farm address as a business. Residential fees will apply.
RESIDENTIAL AND LIFTGATE FEES WILL APPLY-EMAIL FOR COST.
See order Policy for more infomation.