| | |
|
| |
| | |
|
Tools & More

|
Proxxon 34108 Bench Micro Mill - FF 230
|
Part Number/UPC: 4006274341081
Manufacturer: Proxxon
Manufacturer Part No: 34 108
|
Proxxon 34108 Bench Micro Mill - FF 230
The MICRO mill FF 230 is a small, accurate milling system used to
mill, drill and countersink steel, cast iron, aluminum, brass and
plastic. The headstock swivels through 360°, indicated on a scale.
Height is adjusted via a zero adjustable hand wheel, also used as fine
feed when milling. One revolution equals 1/32" (1mm) travel, 1 division
equals .002" (0.05mm).
The quill and headstock may be locked in position, which is
essential when milling.
The powerful permanent magnet motor drives via a poly-v-belt,
yielding high torques, especially at lower speeds.
The machine comes with three collets of 15/64", 5/16" and 25/64" (6,
8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x
80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of
12 x 6 x 5mm).
Technical data:
Speeds
|
280 - 550 - 870 - 1,250 - 1,700 - 2,500rpm
|
Table
Size
|
10 5/8" x 3 5/32" (270 x 80mm)
|
Column
Size
|
Ø 1 3/8" x 15 3/4" long (35 x 400mm)
|
X-Y Travel
|
6 11/16" x 2 9/16" (170mm x 65mm)
|
Overall
Height
|
20" (500mm)
|
Volts
|
110 - 120V AC, 60Hz
|
Weight
|
41 lb. (17kg)
|
|
Hand wheel serves as both height adjustment and fine mill feed.
|
|
Poly-V drive system offers 6 speeds between 280 and 2,500rpm.
|
|
The clamps and work piece shown are not included.
|
|
Hand wheels with zero adjustable scale,
1 rev = 1/32" (1mm),
1 division = .002" (0.05mm).
|
|
|
Important:
For best results when milling, it is recommended to lock the
headstock. This is easily done via the FF 230's lock levers.
|
|
|
|